Swamp coolers are the easiest available option to escape the summer heat.
They evaporate water from the air, store it and pass air through it.
Once the air is cool, it is released into the room.
This whole process takes less than three minutes to circulate air in the whole room.
As fresh air is pumped in there is no need to shut the doors and windows of your office.
It is best suited for office space where doors are opened regularly, leaving the air conditioner without any effect.
Units manufactured by Arvin are inexpensive and can run throughout the year if maintained well.
The evaporative cooler has filters that are used to collect dust and other pollution that is required to be cleaned regularly in the summer months and once during other seasons.
Minerals and other sediments collect near the motor which decreases the performance of the cooler if it is not cleaned regularly.
The appliance must be disinfected every six months to allow hygienic and odor free air to circulate in the house or office space.
Used Arvin swamp coolers are also available in the market; it is best to check the maintenance done on the unit before purchasing it.
The first step in maintaining any swamp cooler is to remove the filter pads from the weatherproof cover and wash them with water.
The sump and bleed-off systems need to be cleaned thoroughly.
All the waterways must be wiped clean before fitting the filter pads back in place.
Once all the drain valves are closed fill it with water.
These simple steps can help the cooler perform better and last longer.